The HardTube project becomes a reality. Alphacool takes a completely new way and clearly sets!
Alphacool extends the HardTube range - UV active Plexi tubes in various lengths.
The method most commonly used previously for water cooling systems is normal PVC hoses - now Alphacool offers another approach to water cooling. The Alphacool HardTube again brings more tidiness into the system which makes a much more structured impression.
Brand new plexi tubes with the Alphacool HT connectors make installation very simple, they connect completely sealed together. The plexi tube can be adapt to the system with the appropriate bending tool without needing to use additional angles.
For a strong illuminating power range already two 30cm UV cathodes are enough. If that is not sufficient you can generate more brightness by UV-active, transparent or colored liquid.
The path of a masterpiece is ready and curious looks guaranteed!
The following options are available:
HardTube 13/10mm Clear Plexi UV-Blue 20cm, 40cm, 60cm and 80cm
(all lengths also available as a set of 4)
Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort.
Scope of delivery:
Alphacool HardTube 13/10mm plexi clear UV-Blue 80cm - 4pcs
Attention: Not compatible with Monsoon fittings.
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Max. arbetstryck:||4 Bar (vid 20°C)|
|Användningstemperatur:||-20°C till +60°C|
|Yttre diameter:||13mm (1/2")|
|Inre diameter:||10mm (3/8")|
|UV - färg:||blå|
Klicka här för att se dessa betyg.