13mm (1/2') anslutning G1/8 med O-Ring (High-Flow)

Artikel nr.: 63052
Tillverkarens nr.:
EAN: 4049469039608
Vikt: 0,013 kg

> 250 redo för leverans inom 1-3 dagar

20,63 kr *

13mm barbed fitting made from nickel coated brass with O-ring seal for hoses with an inner...mer

Produktinformation

13mm barbed fitting made from nickel coated brass with O-ring seal for hoses with an inner diameter of 11-13mm .
Inner diameter of connector: 13mm
This hose connector was specially designed for Highflow systems.

Note: For safety reasons we recommend the use of zip ties or hose clamps for additional hose fixation.

Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required

Tekniska detaljer och videor mer

Tekniska detaljer

Roterande:	Nej
Material:	Mässing
Kompabilitet:	Mjuka slangar (PVC, Silikon, Neoprene), styv slang
Specifikation:	Form: rak
Tillverkare:	Aquatuning
Andra ingång:	G1/8" yttre gänga
Gänglängd:	7-8mm
Första ingång:	Slangnippel 12 & 13mm (1/2")
Färg:	nickel