13mm (1/2') anslutning G3/8 med O-Ring (3-Stil)

13mm (1/2') anslutning G3/8 med O-Ring (3-Stil)

Artikel nr.: 63050
Tillverkarens nr.:
EAN: 4049469037093
Vikt: 0,028 kg

> 50 redo för leverans inom 1-3 dagar

22,96 kr *

Kostnad inkl. VAT plus fraktkostnader

13mm barb fitting made from nickel coated brass with O-ring seal for PVC, PU, PA, silicone or PE...mer

Stäng meny

Produktinformation

13mm barb fitting made from nickel coated brass with O-ring seal for PVC, PU, PA, silicone or PE hoses with an inner diameter of 11-13mm. G3/8" outer thread. The hose must be fixated with a zip tie or hose clamp. Inner diameter of fitting: 10mm.

Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required

Tekniska detaljer och videor mer

Tekniska detaljer

Roterande:	Nej
Material:	Mässing
Kompabilitet:	Mjuka slangar (PVC, Silikon, Neoprene), styv slang
Specifikation:	Form: rak
Tillverkare:	Aquatuning
Andra ingång:	G3/8" yttre gänga
Gänglängd:	7-8mm
Första ingång:	Slangnippel 12 & 13mm (1/2")
Färg:	nickel