Your watercooling and modding distributor Your watercooling and modding distributor

Alphacool flödesindikator G1/4 med rpm-signal - Plexi

> 250 i Webblager

228,88 kr *

Kostnad inkl. VAT plus fraktkostnader

The Alphacool flow sensor is designed to fit the needs of computer water cooling enthusiasts. As...mer
Produktinformation

The Alphacool flow sensor is designed to fit the needs of computer water cooling enthusiasts. As other flow sensors have unusual threads or need an additional electronic device, this Alphacool flow sensor can be used with G1/4 fittings and can be directly connected with a standard 3-pin fan cable to a mother board, a fan controller or an electronic device (Heatmaster, Aquaero, T-Balancer)

Connect to a main board:
The flow sensors will be detected from the main board like a normal 3-pin fan. Normally it is possible to set the main board software this way, that depending on the rotation speed (or if there is no rotation at all) the computer will be shut down. This makes it possible to have a very good and save way to protect the hardware without additional costs.

Connect to a fan controller:
The flow sensor will be detected and will get the input of the rotation speed like a normal 3-pin fan. If the fan controller includes a Display and / or an alarm function, they can be used also with the flow sensor.

Connect to an electronic device:
The signal from the flow sensor will be detected as a “puls” and can be calculated to the needed unit of measurement (for example l/h or g/h). If you use an Alphacool Heatmaster, it is possible to start an alarm when the flow rate is too low or even to shut down the computer.

Technical data:
Material: Plastic
Threads: G1/4
Measurements: Length: 46mm, outside diameter: 52mm
Cable length: 33cm
Cable plug: 3-pin

Folgende Werte sind ermittelt worden Toleranz +/- 10%:
125rpm entsprechen 190 Liter / Pro stunde
150rpm entsprechen 250 Liter / Pro stunde
175rpm entsprechen 320 Liter / Pro stunde
200rpm entsprechen 390 Liter / Pro stunde
225rpm entsprechen 450 Liter / Pro stunde
250rpm entsprechen 500 Liter / Pro stunde

In praxis the actual pulse per 1000ml may verify, depending on the type of construction and the system you use. Therefore we recommend to make a precise measurement of the flow rate in an installed system whenever exact flow rates are needed (for example for industrial purposes)

Utmärkelser
Frågor & Svar mer
Frågor & Svar
1 Frage(n) in anderen Sprachen.
Klicken Sie hier, um diese Frage(n) anzuzeigen.
Frage von Guest #241563 vom 05. May 2016
This flow meter has a minimum speed below which no marks or otherwise should mark?
Antwort von Administrator vom 05. May 2016
It is not descriped, so i think you can use it without any problems.
Haben Sie eine Frage?
Hinweis: Ihre Frage wird öffentlich einsehbar sein und kann - neben unserem Support - auch durch ein Mitglied unserer community beantwortet werden. Sie können Ihren öffentlich sichtbaren Namen und Ihre Email Benachrichtigungen in Ihrem Kundenkonto konfigurieren.
Läs, skriv och diskutera recensionermer
Recensioner
5 Stjärna:
(4)
4 Stjärna:
(3)
3 Stjärna:
(0)
2 Stjärna:
(1)
1 Stjärna:
(0)
8 Bewertung(en) in anderen Sprachen.
Klicken Sie hier, um diese Bewertungen anzuzeigen.
Bewertung schreiben
Hinweis: Ihre Bewertung wird erst nach einer manuellen Sichtung freigeschaltet.
Vänligen skriv in siffrorna i textfältet.
-33%