- Artikel nr.: 19139
- Tillverkarens nr.: 17180
- EAN: 4250197171809
- Vikt: 0,335 kg
Kostnad inkl. VAT plus fraktkostnader
|Dimensioner (L x B x H):||0,5mm|
|Kompabilitet:||128 x 57 x 16mm|
The Alphacool D-RAM water block is one of the few water blocks which uses the stock heatspreaders on RAM modules for mounting.
In typical Alphacool design, copper cooling plate and Acetal top, this RAM water block is designed to allow even beginners easy and quick mounting: Remove the old passive heatsinks, usually by removing three hexagonal socket screws and taking off the heatsinks. Then remove the old thermal compound and apply a new thermal interface (not included). The now cavant threads in the heatsink can now be used to mount the new water block with the old screws - done!
This water block is designed to cover up to 4 neighbouring slots. Not all 4 slots need to be utilized, it is also possible to use less modules, but at least 2.
Even if only four slots are present, the water block will stand over a little but can still be used.
By design this water block allows ideal cooling performance even with low flow rates under 60l/h.
Material: Copper, Plexi
Connection threads: 2x G1/4"
Dimensions (LxWxH): 128 x 57 x 16mm
RAM modules: Up to 4 pcs.
Compatibility with these RAM water blocks
Extent of delivery:
1x Alphacool D-RAM water block
This product has been reviewed for you: