Your watercooling and modding distributor Your watercooling and modding distributor

Alphacool magnetisk ventil - Krom

  • 1012177
  • 17358
  • 4250197173582
  • 0,283 kg

> 50 i Webblager

260,38 kr *

Kostnad inkl. VAT plus fraktkostnader

Rekommenderade tillbehör
Extra kostnad
Phobya extern PSU 230V till 4Pin Molex 34 Watt inkluderande Euro/UK-kontakt
1x
Phobya extern PSU 230V till 4Pin Molex 34 Watt inkluderande Euro/UK-kontakt
190,00 kr*
Tekniska detaljer och videor mer
Tekniska detaljer
Videor
Ball valves which can be manually opened and closed should be familiar to most. With this...mer
Produktinformation

Ball valves which can be manually opened and closed should be familiar to most. With this product you have an electronically-controlled valve. When electricity is conducted through the 4-pole Molex plug to the connector, the fastener opens magnetically. When the current is stopped, the magnets close the fastener on their own.

The magnetic closure serves to improve the safety of your water circuit. If, for example, you are using external radiators, you can place the valve in front of the bulkhead connector on your shell in order to prevent water from running out, in case the external hoses or the radiator are damaged. The same goes for the transport of water cooled systems with external elements.

But this valve can also be used in places other than PC systems. One possibility might be with a small filling machine. Here the volume of water can be adjusted electronically by timing the valve closure. The valve could also serve as a safety closure in machines, for example as an emergency shutdown in case of a power outage.

 Technical Specifications:

  • Dimensions (WxHxD): 43,5 x 64 x 31mm
  • Material: plastic / Brass chromed
  • Top is rotatable
  • Connection: 4Pin molex connector
  • Kable: 30cm sleeved
  • Thread: 2x G1/4" inner thread

 Scope of Delivery:

  • 1x Alphacool magnetic valve - Chrome
Utmärkelser
Frågor & Svar mer
Frågor & Svar
Frage von johannes h. vom 04. April 2016
Welche Anschlüsse hat das Ventil?
Antwort von Administrator vom 04. April 2016
Das Gewinde ist ein Standart G1/4".
Antwort von Marcial K. vom 10. October 2016
Braucht dieses Ventil einen Mindestbetriebsdruck? Oder was ist der Unterschied zum teureren 2/2 Wege Ventil ? http://www.aquatuning.ch/wasserkuehlung/anschluesse/kugelhaehne-ventile/20027/alphacool-2/2-wege-highflow-elektromagnetventil-12v-dc?c=2911

Haben Sie eine Frage?

Hinweis: Ihre Frage wird öffentlich einsehbar sein und kann - neben unserem Support - auch durch ein Mitglied unserer community beantwortet werden. Sie können Ihren öffentlich sichtbaren Namen und Ihre Email Benachrichtigungen in Ihrem Kundenkonto konfigurieren.
Läs, skriv och diskutera recensionermer
Recensioner
5 Stjärna:
(0)
4 Stjärna:
(0)
3 Stjärna:
(0)
2 Stjärna:
(0)
1 Stjärna:
(0)

Bundle

Bundle

-24%
Y-sockel - inre gänga G1/4 Y-sockel - inre gänga G1/4
26,13 kr * 34,50 kr *